Monday 18 November 2019

Concertina Fold Panel Card - Video Tutorial


Today I'm sharing two Videos. If you are interested in the Box only, scroll right down past the Measurements for the card and you will find the details :o)

I think this is one of my favourite projects for this year! I've thoroughly enjoyed creating these cards.


Both cards shown in this post use the Brightly Gleaming Specialty Designer Series paper - which I am in love with. It's just so beautiful. Each sheet has Copper foiling on one side and that makes it so special and luxurious!


I used the coordinating Christmas Gleaming stamp set to decorate the cards. The colour combination used here is Night of Navy, Copper and Very Vanilla.


You do need 12" paper to complete this project. I used the beautiful Copper Star sheet for the entire card. The centre concertina piece is the pattern on the reverse of it.


This is a top view of the card. This version of it is very dimensional, which is why I made a box to fit the card. Closed the card measures 6" x 5".


I added a panel on the reverse of the card where you can write your message.


This is the card and box that I made in the Videos. I used another beautiful sheet of paper, this time in Pretty Peacock and Copper. This one has to be my favourite. 

When creating it, I did make a pretty big mistake. Instead of using Pretty Peacock ink for the stamping, for some reason I used Night of Navy again! I've corrected it now though and am much happier with the project :o)


Look at that Copper shine! It's just lovely! Until this paper pack came along I wasn't a fan of Copper, but that has definitely changed now. 

The colour combination I used for this card is Pretty Peacock, Copper and Very Vanilla ....


In the Video you will see me use Night of Navy ink. It wasn't worth re-doing it for that one mistake :o)


Here is the Video for the Card ...



Measurements

Pretty Peacock Card Base                                         10” x 6”

Brightly Gleaming DSP (a)                                         12” x 6”

With the LONG side across the top: Score down at 2”, 4”, 6”, 8” and 10”

Brightly Gleaming DSP (b)                                         8” x 4”

With the LONG side across the top: Score down at 2”, 4” and 6”


Position (a) into the Trimmer with the SHORT side across the top and the RIGHT-HAND edge at 1½”Cut down from 2” to 10” (between first and last scored lines).
Turn and repeat for the other side.

Position (a) into the Trimmer with the LONG side across the top and the LEFT-HAND edge at 2”: Cut down from 1½” to 4½” (between the horizontal cut lines). Turn and repeat for the other side. Remove the centre section to create a ‘window’.

Still, with the LONG side across the top, position the LEFT-HAND edge at 3”: Cut down from 1” to 1½” and from 4½” to 5”. (You are making ½” cuts above and below the ‘window’ edges at the centre of each 2” section).

Move the LEFT-HAND edge to 5” and repeat the cuts.
Move the LEFT-HAND edge to 7” and repeat the cuts.
Move the LEFT-HAND edge to 9” and repeat the cuts.

Mats

Back:
Copper Foil                                                          11.4cm x 8.9cm  (3½” x 4½”)
Very Vanilla                                                          11.1cm x 8.6cm  (3” x 4”)

Front:
Copper Foil                                                          15cm x 12.4cm   (5⅞”x 4⅞”)
Brightly Gleaming DSP                                       14.6cm x 12cm   (5¾” x 4¾”)
Copper Foil                                                          10.4cm x 7cm     (4⅛”x 2¾”)

Inside:
Copper Foil                                                          7.3cm x 4.8cm    (2⅞” x 1⅞”)
Very Vanilla                                                         7cm x 4.5cm        (2¾” x 1¾”)
Pretty Peacock                                                    4.5cm x 3.3cm    (1¾” x 1 5/16”)

You will need additional Very Vanilla card for stamping, punching and die-cutting and a little extra Copper Foil for stamping and die-cutting.


Here are the two boxes together. 


The Box is very simple to create. I didn't reinforce the sides. The base is 3/4" deep and the lid 1/2".


Here is the Video for the Box ...


Measurements

Box Base:                                                                7⅝”x 6⅝” 

Score on all sides at ¾” 

Box Lid:                                                                   3/16” x 6 3/16”  

Score on all sides at ½” 


Mats

Copper Foil                                                    15.25cm x 12.8cm       (6” x 5”)
Brightly Gleaming DSP                                 14.95cm x 12.4cm       (5⅞” x 4⅞”)
Copper Foil                                                    10.5cm x 7cm               (4⅛”x 2¾”)          
         
You will need additional Very Vanilla card for stamping, punching and die cutting.



Shop With Me Online - 24/7

Join My Team

Find Me On Facebook

Follow Me On Pinterest

Subscribe To My YouTube Channel

Supplies Used

If you are in Europe (UK, DE, FR, NL or AT ) you can purchase any of the products below through me in my Online Store. Click on any of the links to take you directly to that item.




1 comment:

balamunch said...

I just love this card, going to have to have a go myself. Thank you.

Linda.